How We Can Make the Surf Industry Much More Sustainable

VIA – OUTSIDE

 

Tuesday, November 13, 2012

 

 

 

Photo: Sustainable Surf

Here is the good news: Expanded polystyrene (a.k.a. EPS, or the branded name Styrofoam) is recyclable. Here’s the bad news: much of it is not recycled and therefore EPS-based surfboards are made from virgin EPS. Some more bad news: Only about 30 percent of surfboards are made with EPS. One more piece of bad news: The most commonly used resins* used in surfboard manufacturing are toxic. Sustainable Surf, a non-profit aimed at helping the surf industry reduce its environmental impact, is hoping to change all of that bad news.

The NGO celebrated the launch of its Ecoboard program, which finally established an industry benchmark that board makers can follow in order to boost the environmental credibility of their products, last week in San Francisco. “Ecoboard is the industry’s first third-party science-based benchmark,” Sustainable Surf’s co-founder Michael Stewart told me.

Stewart is a life-long surfer, and he looks like one. But he’s also all business, which becomes apparent as he starts to talk shop, rattling off the attributes of recycled EPS and the potential of using bio-based epoxy for glassing a surfboard instead of using polyester resins. The majority of surfboards on the market today are manufactured with polyurethane foam cores, which can be recycled but aren’t in any meaningful quantity, and these boards are made with polyester epoxies.

Prior to launching Sustainable Surf, Stewart worked at Underwriters Laboratories, a standards-setting organization serving the electronics industry. He knows from standards. And he’s quick to point out that Sustainable Surf is still a long way from developing a sustainability standard for the surf industry—doing so will be major undertaking. “We’re going to build a standard,” he says. “But first it’s a [bench]mark.”

The benchmark provides a good starting point. It was created using thorough life cycle assessment (LCA) studies, which hash out the carbon emissions and toxicity of just about every step of a board’s manufacture and its constituent parts.

By using bio-based epoxy resin (which replaces some of the petroleum ingredients with bio-based materials such as paper industry byproducts and biofuel) and recycled EPS blanks, surfboards can be made with a 40 percent smaller carbon footprint and 100 percent fewer toxic components.

AN ECOBOARD
A finished surfboard can be sold with the Ecoboard mark if it meets at least one of these three requirements:

— A foam blank with a minimum of 40 percent recycled content, or at least 40 percent biological (non-petroleum) content.

— A board glassed with epoxy resin containing at least 15 percent biological content.

— A wood blank (a number of board makers have returned to surfing’s roots by making boards of lightweight woods).

Certified Ecoboards include a label with a QR code that consumers can scan in order to learn more about the benchmark and the board’s backstory.

But in many respects, Stewart is just hoping to nudge the surfing industry—starting with board construction—into the 21st century. Despite surfing’s rootsy image, the environmental impact of the petroleum-heavy tools of the trade, from boards to wetsuits, is largely ignored. “When Walmart is kicking your ass on sustainability, you know you’re [driving] on cruise control,” Stewart says of the surf industry, though he notes there are some standouts, such as Patagonia, that are making a concerted effort to lessen the sport’s impact.

THE BIGGER PICTURE
“Riding an Ecoboard is not going to save the planet,” says Stewart. But it’s a first step, he thinks, toward starting a conversation about surfing’s connections to climate change. Another trigger for those conversations—the rising sea levels that threaten to, as Stewart describes it, “swamp out surf breaks“—will come too late.

As Sustainable Surf grows, it plans to not only mature the benchmark into a full-on standard, but also expand into wetsuits and other surf-related products. The hope is that the momentum behind and the demand for more environmentally-friendly products will grow and major surfboard manufacturers will start to use recycled EPS foam and bio-based resins.

An Entropy tech glassing a recycled EPS board at the Ecoboard launch party. Photo: Sustainable Surf

Recycled EPS is easy to recycle and can be continuously recycled, meaning that the foam from an EPS-based board could actually be reused at the end of the board’s life. But the EPS recycling market depends on the collection of used EPS from reliable, consistent sources. To ensure that this happens, Sustainable Surf launched the Waste to Waves program in partnership with Reef, Surfrider Foundation, and other groups to establish and promote used EPS collection boxes throughout California coastal communities. The boxes are generally located outside of surf shops and most material collected is from consumer packaging.

Waste to Waves passes the foam onto Marko Foam Products, which supplies recycled EPS blanks to some of the industry’s top board shapers.

Stewart is keen to get…

 

For the full article go here:

 

http://www.outsideonline.com/blog/outdoor-adventure/events/sustainable-surf-industry.html?179082491

Become A Sponsor!
If you have a product or service that is a good fit for our surf community, we have opportunities for you to sponsor this blog! Download our media kit now!
Chris Nomad: Passionate Nomad: Born in Venice, lived in Hawaii 7 years, surf Santa Cruz 25+ years. Professional Writer, Artist, Environmentalist, Entrepreneur, Noob Photog. You can find him on